Having fun at the dyno!

Subject: Having fun at the dyno! Fri Sep 24, 2010 11:50 pm

So as some of you know I decided to get a bit nutty with the 70 Coronet. I decided to add cutouts on my exhaust. Its actually my plan to get things set up for when I decide to put the stroker engine in this car sometime in couple years. Well anyway I had Nate over at his new shop put them on and tune the set up. Here is a couple things to know the Coronet.

The Coroent when dyno tuned before made a respectable 304 hp, and 416 lb of torque.

Well after changing out my carb to the Holley carb and opening up the dumps the car made 327 HP with 421 lbs of torque.

So anyway for a little bit of exhaust work and placement of my Holley I gained 24 hp of horsepower. and broadened out my torque ban.

Anyway not even close to the big dogs on here, but still I thought it was neat.

Nate again was very helpful and willing to go above and beyond in the pursuit of collector gaskets and stayed late to help me get it set up.

MIke

Subject: Re: Having fun at the dyno! Sat Sep 25, 2010 3:49 am

what does the Coronet weigh in at?
that's an impressive gain, congrats. Very Happy

Admin Posts : 1908 Join date : 2010-01-26

nice that thing should do pretty well from a dig, yea?

Subject: Re: Having fun at the dyno! Sat Sep 25, 2010 7:52 am

Yeah, I was really happily suprised what it gained David. The coronet is kind of portly at 3960 lb with me in it.

Logan, I hope from a dig she does all right. I've put a lot of work in her over this summer to make it more ready for the drags.

Anyway, I think it sounds really cool, plus it's a fairly cheap mod and one that I was suprised yielded any signifigant benefit.

Mike

Guest

Very Cool, Mikey. Cool

Subject: Re: Having fun at the dyno! Sat Sep 25, 2010 8:37 am

Awesome!

Legit Posts : 4589 Join date : 2010-01-26 Age : 44

sounds like your getting the thing all tuned and ready to run.

Legit Posts : 1592 Join date : 2010-01-26

That's awesome mikey. I love that car!

Guest

Nice torque #'s!

Subject: Re: Having fun at the dyno! Sat Sep 25, 2010 11:35 am

Yeah its a fun little car, not a world beater, but still fun! Now, the question will be lets see if it is enough to get it into the 12's.

Mike

Guest

SPRAY THAT FUCKING THING, SPRAY IT GODDAMIT SSSPPPPPPRRRRAAAAYYYYY IT !!!!!!!!!!!!!!!!!!!!!!!!!!!!!!

Subject: Re: Having fun at the dyno! Sat Sep 25, 2010 2:18 pm

I knew this was coming No!!! I actually thought about it a bit and Steve talked about it for a second my pistons kind of follow the theme of the car, and are rather portley and probably wouldn't stand up to it. I actually am not real interested in windowing this block anytime soon.

Mike

Subject: Re: Having fun at the dyno! Sat Sep 25, 2010 7:34 pm

Awesome!

Legit Posts : 1592 Join date : 2010-01-26

MikeyT wrote:: I knew this was coming No!!! I actually thought about it a bit and Steve talked about it for a second my pistons kind of follow the theme of the car, and are rather portley and probably wouldn't stand up to it. I actually am not real interested in windowing this block anytime soon.

Mike

I refuse to believe that motor couldn't take a 75 shot. You know you want to!

Subject: Re: Having fun at the dyno! Sat Sep 25, 2010 9:09 pm

overblown wrote:: I refuse to believe that motor couldn't take a 75 shot.

All motors can take a 75 shot. Hell ive seen lawnmowers take 50. ( for a short while ).

Subject: Re: Having fun at the dyno! Sat Sep 25, 2010 9:13 pm

408 4 Eye wrote:

overblown wrote:: I refuse to believe that motor couldn't take a 75 shot.

All motors can take a 75 shot. Hell ive seen lawnmowers take 50. ( for a short while ).

thanks, now I'm gonna have to try it Neutral

and I just bought a new mower this year, god damnit.

Subject: Re: Having fun at the dyno! Sat Sep 25, 2010 9:27 pm

DavidESchiller wrote:: thanks, now I'm gonna have to try it

https://www.youtube.com/watch?v=GL1tA8FXmkg

Legit Posts : 4589 Join date : 2010-01-26 Age : 44

overblown wrote:

MikeyT wrote:: I knew this was coming No!!! I actually thought about it a bit and Steve talked about it for a second my pistons kind of follow the theme of the car, and are rather portley and probably wouldn't stand up to it. I actually am not real interested in windowing this block anytime soon.

Mike

I refuse to believe that motor couldn't take a 75 shot. You know you want to!

I think i told him that but here is the thing it is not a jizz rocket and is not what that combo is built for........ yes it would hold a 75 shot im sure...........

Subject: Re: Having fun at the dyno! Mon Sep 27, 2010 6:02 pm

Here are a few pictures and sounds for our pleasure! I'm sorry I giggle every time I listen to it! I know....I know I'm easily amused!

https://www.youtube.com/watch?v=Oc-SlHqFKqM

A picture of the dyno run!

Having fun at the dyno! Photo

Mike

Subject: Re: Having fun at the dyno! Mon Sep 27, 2010 6:04 pm

The colored lines are the first pull, the dotted lines after the headers were uncapped.

Mike

Subject: Re: Having fun at the dyno! Tue Sep 28, 2010 2:13 pm

Numbers look good Mikey!

Subject: Re: Having fun at the dyno! Fri Oct 08, 2010 5:57 pm

Nice job mikey

Subject: Re: Having fun at the dyno! Sat Oct 09, 2010 9:47 am

MikeyT wrote:: Here are a few pictures and sounds for our pleasure! I'm sorry I giggle every time I listen to it! I know....I know I'm easily amused!

https://www.youtube.com/watch?v=Oc-SlHqFKqM

A picture of the dyno run!

Mike

note the afr's are after the cutouts on the uncorked/dotted run. but the afr's are titties right out of the box w./that holley!

Subject: Re: Having fun at the dyno! Sat Oct 09, 2010 11:17 am

ma70tt wrote:

MikeyT wrote:: Here are a few pictures and sounds for our pleasure! I'm sorry I giggle every time I listen to it! I know....I know I'm easily amused!

https://www.youtube.com/watch?v=Oc-SlHqFKqM

A picture of the dyno run!

Mike

note the afr's are after the cutouts on the uncorked/dotted run. but the afr's are titties right out of the box w./that holley!

Yeah that Holley looked outstanding when we got it all hooked up and ready to go. At sometime we should move those Afr's up and see how it looks with the headers uncorked.

Mike

» dyno done
» AWD Dyno
» Dyno vid
» First Trip To The Dyno
» Went to the dyno again today...